Decotron® EFD1
The water-based cleaning agent (stripper) is determined to remove cured and uncured conformal coatings from coating frames, PCBs (varnish remover pcb), and coating machine parts components. Intended for removing acrylate and polyurethane coatings. Ready-mix, intended for direct use. Intended for use in cleaning systems with air-bubbling or high-pressure spray-in-air cleaning technology.
- Environment-friendly, biodegradable, low VOC content
- High operator safety
- High compatibility with materials and components of the cleaned devices
- Recommended for use in systems with closed cleaning processes and mechanical filtration
- No flash point, can be heated to increase the cleaning efficiency
- Forms a stable emulsion
- Rinse with DI water needed
Cleaning parameters
- Uncured/cured coating – coating frames
- Uncured/cured coating – PCBs
- Uncured/cured coating – components of coating machines
Recommended technology
Process
| Cleaning Technology | 1. RINSE | 2. RINSE | DRYING |
| Air-bubbling / Spray-in-air |
Hot air |
Specification
| Appearance | Two-phase liquid/emulsion |
| pH Value | 7 |
| Odor | Specific Organic |
| VOC Content | 25 % |
| Ready-mix Concentration | 25 % |
| Available in Concentrate | Yes (to dilute with DI water) |
| Recommended Process Temperature | 20 – 30°C |
| Flash point | Non-flammable |
| Density at 20 °C | 0.90 kg/l |