Features
Suitable for Automation
The HF-600 Auto-soldering unit and the FU-500 Solder Feed Unit can be combined and integrated into production or automation line for fully customisable Low Cost Intelligent Automation (LCIA).
Looking for an automation solution? Reach out to our sales team sales@hakko.com.sg for a discussion and proposal!
400W Ultra High Power, Ultra Fine Tips
With an ultra high power of 400W, the perfomance of HF-600 sees a 20% improvement over conventional models. Thick, multi-layered boards or components with large heat sinks can now be easily soldered while still using the same tips from the TX1 and TX2 tip series.
Different Tips for Different Wattage
Introducing the new TX3 tips with new tip shapes for a wider range of application and better solder quality
- TX1 - 140W
- TX2 - 300W
- TX3 - 400W
Nitrogen soldering is also supported for increased wettability of solder.
External Output and Communication
Via ethernet communication, parameters and settings can be easily changed and output data such as tip temperature can be viewed and analysed.
Software and Infrared Communication
When paired with a tip thermometer (FG-100B or FG-101B), temperature correction and calibration can be performed automatically via infrared signals. Connecting to a PC allows tracking and recording of hot air temperature settings, calibration, correction, and history - providing review and analysis with ease.
Connecting to Factory Air Source
Quickly cool down the inside of the station by connecting with the air supply in the premises.
Emergency Stop Button (HU-200)
When the emergency stop button of HU-200 is pressed while HF-600 is in use in conjunction, the HF-600 will be automatically de-energized.
Packing List
| Main Unit | HF-600 |
| Soldering Iron (1 type only)* |
FU-6001 (straight-type) OR FU-6002 (L-type) |
| Soldering Unit Mounting Base Assembly | CX5019 |
| Tip Adjustment Unit (for TX1, TX2, TX3) | CX5007 (TX1) CX5018 (TX2, TX3) |
| Soldering Iron Cable (5m) | BX1033 |
| Heat Resistant Pad | B2300 |
| Filter | AF5000 |
| Relay Cord | BX1056 |
| Power Cord | B2387 |
| *Soldering Tip not included |
The product does not include a solder feed pulley unit, solder feed guide set, or fluororesin tube.
Please purchase these separately according to the solder diameter you will be using.
Specification
| Main Unit | HF-600 |
| Unit Power Consumption | 460W |
| Temperature Range | 50 - 500°C |
| Temperature Variance | +/- 5°C without load |
| Dimensions | 140 W x 111 H x 212 D mm |
| Weight | 4 kg |
| Soldering Iron Type |
FU-6001 Straight-type FU-6002 L-type |
| Soldering Iron Power Consumption | 390W |
| Tip to Ground Resistance | ＜2 Ω |
| Tip to Ground Potential Difference | ＜2 mV |
| Cord Length | 5 m |
| Handpiece Length | 197 mm (with TX3-XD4 tip) |
| Handpiece Weight | 133 g (with TX3-XD4) 172 g (with TX3-XD4 tip and mounting base) |
| Soldering Tips | TX1, TX2, TX3 Auto-detection of heater resistance |
| Communication | LAN (TCP) / Infrared / Serial (HU-200) |
Soldering Tips
| Soldering Tip Series | Nozzle Assembly Series (For N2 Soldering) |
| TX1 (140W) | TX1 Nozzle Assembly |
| TX2 (300W) | TX2 Nozzle Assembly |
| TX3 (400W) | TX3 Nozzle Assembly |
Replacement Parts
| CX1010 | Feeder Unit Φ0.3-1.6mm L Type |
| CX5006 | Feeder Unit Φ0.3-1.6mm, Straight Type |
| BX1036 | Feeder Cable 5m (FU-500) |
| BX1016 / BX1017 | Tube Unit |
| FU-6001 | Soldering Iron Straight Type |
| FU-6002 | Soldering Iron L Type |
| BX1033 | Soldering Iron Cable 5m |
| B2300 | Heat Resistant Pad |
| AF5000 | Filter (1pc) |
| BX1056 | Relay Cable |